SUBSCRIBE TO OUR NEWSLETTER

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

UEA 0.50” – 1.00” Bore Slip Ring Circuit Options

The United Equipment Accessories (UEA) 0.50” - 1.00” bore slip ring series offers a wide variety of circuits depending on the customer's requirements.

Josh Bockholt
Senior Design Engineer
September 6, 2018
1 inch bore slip ring

The United Equipment Accessories (UEA) 0.50” - 1.00” bore slip ring series offers a wide variety of circuits depending on the customer’s requirements.

Our existing 0.50”-1.00” bore slip ring circuit options are as follows:

2.0 Amp – The 2.0 Amp circuit option uses a “radiused” compact brush assembly and a two-post brush design. The brushes are radiused so that there are four points of extended pressure contact. This circuit option is available with copper or silver graphite brushes and brass, plated silver, or coin silver rings. The voltage option for this circuit is 28V.

7.5 Amp – The 7.5 Amp circuit option uses a compact brush assembly and a two-post brush design. This circuit option is available with copper or silver graphite brushes and brass, plated silver, or coin silver rings. The voltage options for this circuit are 28V-600V.

10-15 Amp – The 10-15 Amp circuit option uses a 0.125” wide brush assembly and a two-post brush design. This circuit option is available with copper or silver graphite brushes and brass or plated silver rings. The voltage options for this circuit are 28V-600V.

20 Amp – The 20 Amp circuit option uses a 0.125” wide brush assembly and a two-post brush design. This circuit option is available with copper graphite brushes and brass rings. The voltage options for this circuit are 28V-600V.

30-45 Amp – The 30-45 Amp circuit option uses a 0.25” wide brush assembly and a two-post brush design. This circuit option is available with copper graphite brushes and brass rings. The voltage options for this circuit are 28V-600V.

60-80 Amp – The 60-80 Amp circuit option uses two 0.25” wide brush assemblies and a two-post brush design. This circuit option is available with copper graphite brushes and brass rings. The voltage options for this circuit are 28V-600V.

For more information on material selection, please our conductors overview page.

UEA strives to meet our customer’s specific circuitry needs. Customized options are available upon request and our UEA engineers are available to assist customers by recommending ring and brush materials based on the customer’s specific slip ring applications.

MORE FROM US

SOLVING PROBLEMS IS OUR PASSION

LET US CREATE YOUR CUSTOM SOLUTION TODAY!

contact us