Reducing Slip Ring Enclosure Size

Posted on Tuesday, August 2, 2016 in UEA Blog


Recently, some of our customers have been asking, “What can be done to reduce the overall height in our S15A series slip rings?” Typically these slip rings are designed to mount above or below our customer's existing hydraulic swivel. Most of the time, the outer portion of the slip ring is retained by a fork style mounting bracket coming from the hydraulic swivel. The fork style mounting bracket catches a bolt or pin which threads into the side of the slip ring base casting for retention.

In the case that the hydraulic swivel is not a UEA design, changing the fork bracket design is not a cost effective solution for the customer. We are able to work around this and maintain the same retention method with the use of our S15D series slip ring. In switching to the S15D series, the elbow liquid tight connectors for the brush harness exits need to change to straight liquid tight connectors, which allow the mounting tube flange to be pulled up closer to the bottom of the base casting. The threaded torque hole in the S15A series is moved up into the side of the dished base casting of the S15D series the same distance the mounting tube flange is moved, keeping the distance for the fork bracket to pin retention the same. In the particular example shown below, we were able to reduce the overall height by two inches while maintaining the same mounting method for the customer.

Reducing Slip Ring Enclosure Size

Reducing Slip Ring Enclosure Size

In any case, we customize our slip rings as much as possible to meet the needs of our customers. If you would like to learn more about UEA slip rings visit http://www.uea-inc.com/products/slip-rings or give us a call to talk about reducing your overall slip ring size.

Josh Bockholt
Sr. Designer Engineering

READY TO GET STARTED?

REQUEST A QUOTE