Quick Ship Slip Rings

Posted on Tuesday, September 27, 2016 in UEA Blog


At UEA we are often asked which slip rings we carry in stock on a normal basis. Because we specialize in building custom slip rings to meet specific customer requirements with multiple bore sizes, circuit counts, ratings, enclosures, harnesses, etc., it is not feasible to stock all of them

However, we have determined that when a three or four conductor slip ring is adequate for a customer application or to test a project, it makes sense to have that available in a short time. With that in mind, we have come up with a Quick Ship Slip Rings program that quite often can fill the bill.

We currently have two of the following combinations with either no cover or a spun aluminum cover in stock.

  • One inch bore slip ring with (4) conductors rated 20 or 30 amp.
  • One and a half inch bore with (4) conductors rated 20 or 45 amp.

All are rated for 600 VAC and can be used for anything requiring 600 VAC or lower voltages. If less than (4) conductors are needed you can simply not connect the extra wires.

To simplify ordering or quoting you can visit our website at www.uea-inc.com and click on the Quick Ship link. Once you make your selections, the price will automatically fill in and the drawing will show the overall dimensions along with the height and O.D. of the assembly per your choices. UEA offers same day shipping if ordered before 12:00 pm CST.

The next time you are in a rush on a project and need a simple, low-cost slip ring to get you through your testing, remember the UEA Quick Ship is available today!

Steve Dilger
Customer Service Manager

READY TO GET STARTED?

REQUEST A QUOTE